Salary Heads Detail
Salary Head is a key module of the Software, User can define various Allowances, Deductions and effective Variables as per the requirement of the organization. User can define different Calculation Setting Grade-wise i.e. Monthly Basis, Annual Basis, 26 Days Base etc.
Employees having common Allowances and Deductions are preferred to be under one Grade. If there is no current Grade system applicable in the organization, then user should define Grades as per bifurcation required or else, he can follow their existing Grade system. This can ease the monthly processing of Payroll-NX.
User should maintain similar structure of Salary Head in different Grades. It will give ease to generate more complex reports across the Grade, Department, Branch, Cost Center, etc. and also managing the structure of calculation.
For e.g. a1 is D.A., a2 is H.R.A., a3 is Medical Reimbursement and a4 is Conveyance, in the first Grade and if D.A. and Medical Reimbursement is not applicable in the second Grade, then start the Salary Head with a2 for H.R.A. and then enter a4 for Conveyance. User should skip entry for a1 and a3 in second Grade.
Payroll -> Component Setup -> Salary Head

Procedure :
User can define Allowances, Deductions up to 60 and Variables up to 200 each for each grade. These Allowances / Deductions / Variables are applicable to the employee in that grade.
To start defining the columns user need to follow the steps given below:
- Select the Grade and Click on "Create" button for defining the column settings.

- Select the code from a1-a60 for Allowances, d1-d60 for Deductions, v1-v200 for storing run-time values i.e., Variables. (Automatically system fetch code alphabetical which is not used yet, and auto name fetched if code is mapped in Standard Heads)

- User can define their respective Column Name, which will be used for Payslips, Registers and various other reports. Column Name can be D.A., H.R.A, Conveyance etc.
Description of Field Provided in Salary Head
- Column Type : Select the Column type as Formula, At Pay Time, Slab, Fixed, Reimbursement, Periodic, Flag, Fixed Reimbursement, etc. This columns having column type with following terms:
- Formula : When an Allowance / Deduction are based on formula, column type is selected as "Formula" and the formula is written in "Formula" field. The formula method is same as EXCEL formula.
For E.g. ESIC calculation formula can be 1.75 % of Basic + DA + HRA. Or, a1 = DA, a2 = HRA then formula will be 1.75/100*(new_basic+a1+a2) in the formula column.
The user can also use variables used in the software for complex formulas, the variable are mentioned in the "Variable Setup" in utilities.
- At Pay Time : When Allowance / Deduction are decided while monthly processing and also differs from person to person, every month then "At Pay Time" type can be used. Reimbursement, Incentives, etc. are examples for Allowances and Loan, TDS, etc. are example for Deductions. This Allowance / Deduction field is open to enter amount while processing monthly salary in Payroll module.
- Slab : When a column is required to be calculated based on different slab value then column type "Slab" is selected, column formula should be kept empty. Normally Prof. Tax is calculated on slab basis. Slab to be defined in Payroll -> Component Setup -> Define Slab.
- Fixed : When an Allowance / Deduction have same amount for every employee in that grade and same for all the months the Column Type can be selected as "Fixed".
For E.g. If HRA for all the employees in a specific Grade is Rs.1500/- then select type as Fixed and put value as 1500. It can also be used for Employees having different amount but same amount every month (user can change the fixed value at employee level through Employee Salary Structure Sheet / Bulk Mode).
- Reimbursement : When allowances are reimbursed to an employee this column type is selected.
For E.g. Travel Allowance is reimbursed to the employee every month, but it should also not exceed beyond certain limit, which can be set through Reimbursement Module. The user can also get the report like Balance amount to be claimed by the employee. This can also be used for LTA Allowance.
- Fixed Reimbursement : In a specific Grade, if the reimbursement amount paid to an employee is to be calculated on the basis of present days then the column type must be Fixed Reimbursement.
- Formula Reimbursement : When reimbursement are based on formula, column type is selected as "Formula Reimbursement" and the formula is written in "Formula" field. The formula method is same as EXCEL formula.
- Periodic : This type is useful when allowances are given only on specific months like every quarter end or once in a year or any specific month. Here, user has to select this type and rest of the selection has to be made in Periodic Payment master.
- Flag : In a specific Grade, if user wants to bifurcate some employees and calculation for some Allowances / Deductions of those employees has to be on the basis of this bifurcation, then user can open a variable as "Flag". The value for this is defined in Employee Salary Structure Sheet / Bulk Mode. This value remains constant in case Arrears and Supplementary are given.
2. Formula : If user has selected Column Type for any Allowances / Deductions / Variables then he has to define the formula related to that Allowance / Deductions / Variables in "Formula".
The user should try to define the standard Allowance / Deductions as per the Standard Column given in the Standard Head screen. In Payroll-NX user should keep common column code as standard head is common for company otherwise, mismatch in amount can take place.

In Formula Field left side icon provided which is shortcut to Standard Head and Variable setup.
3. Round Off : In all, there are four options as "NO", "YES", "Round Up to 5p." and "Round Up to 10p." User can use any of these four options.
4. Attach As : This is normally applicable with column type = "At Pay Time", This columns can be attached with following terms:
- Tax Free Loan : If the column is of Loan and the loan is a tax-free loan the user should select this type.
- Housing / Vehicle Loan : If the loan given to employee is against Housing / Vehicle. The user can select this type. This will help the user to calculate their perks and I.T. Projection as per the current I.T. Act.
- Other Loans : Loan other than above is selected as this type to calculate their perks and I.T. Projection as per the current I.T. Act.
- Loan Interest : If the column name is of "Loan Interest" the user should select this type. Interest can be auto calculated as per the interest rate defined while issuing loan on reducing balance.
For e.g. If an allowance say Conveyance is of "Fixed" or "At pay time" Column type, given any amount but should be exempted only Rs.800/- per month, then select Attach As "Monthly Exemption" and enter the Exempt Limit as Rs.9600/- (800*12).
- LIC Premium : If user wants to maintain the LIC Policy for the employees through Employee Master Policy Details tab, then he can enter the column as deduction and Attach it as "LIC Premium", this will deduct his premium amount mentioned in "Policy Details" and will also project the same at the time of Tax Projection.
- Mediclaim : If user is deducting any amount for Medi-claim through Payslip and he wanted to give affect of the same amount in Tax workings Under Chapter VI A Deductions (80D), the user can attach the same as “Medi-Claim”.
- CTC Yearly : If any amount to be displayed in the CTC Report, user can select this option. User has to enter the yearly amount in Salary Structure Sheet / Bulk Mode.
- Basic Payment : In FORM 24 there are two bifurcations of Income, i.e., Basic Pay and Other Pay. If any amount user wants to display in Basic Pay then he can attach it as "Basic Payment" and rest all other income will be displayed in Other Pay.
5. Calc. on Present days : When an Allowance / Deduction are paid on pro-rata basis. This option is selected as "YES". This will be calculated on present days + Weekly Off + Paid Holidays + Paid Leaves.
For e.g. If an employee is present for 16 days and weekly off in that particular month is 4 then he will get salary for 20 days. E.g. Total allowance is Rs.3000/- and if user selected "Yes" then he will get Rs.2000/- and if user selected "No" then he will get full amount Rs.3000/-. This option is applicable only for Column Type "Fixed" and "Formula".
6. Print in Payslip : If user doesn’t want a particular Allowance / Deduction to be printed in Payslip. User should select Print in Payslip as "NO". amount in this column will affect the balance in payslip. Note the same will be printed in Salary Register.
7. Consider weekly off : If selected "No", it will calculate the amount for weekly off and Paid Holiday, if "Yes" then will not calculate the amount for Weekly Off and Paid Holiday and "Only Weekly off" will not calculate the amount for weekly off.
For e.g. If weekly off is 4 days, allowance is Rs.3000 and employee is present for full month then the employee will get Rs.2600 else gets Rs. 3000.
8. Account Code : Software also generates Journal Entry for every month; user can use Account code with respect to their existing Accounting software.
- Display in Macro : In any Salary Head code option selected than that head will be display in Macro List of Letter writing and payslip and can be used in template.
- Exclude from CTC : If user wish not to display any head in CTC than select the option.
- Update in Sal Structure His :
- Don’t override from Salary Structure : This option only be displayed in column type “At Paytime” or “Reimbursement”, if option selected than in Paytime basket system will not override value provided from salary structure on performing “Fill Salary structure Value”.
Utilities :
1. Copy Salary Heads : When Column Structure of one grade is almost similar to another grade user can copy the existing structure to the new grade with the "Copy Salary Heads" option. Copy can be done in three ways :
- From Grade To Grade : When user want to copy salary head from one grade to another completely. User can also delete already existing data with “Delete existing Records” option.
- Copy Column Code : When user just want to copy few of the code data from one grade to another.
- Copy Column Code Options : When user just want to copy Column code options i.e. Column Type, Name etc from one grade to another.

2. Export : If user wants to create Salary Head for new company or want to create same Salary Head for one grade as per the existing company then user can use option Export Salary Head. To upload the text file of Salary Head from one company to another, again in new company select file to Import & click on Import Salary Head.

3. Import : If user want to Import the Salary head previously exported or exported from another company than can do this by Import Utility. User can also delete already existing data with “Delete existing Records” option.

4. Variables Setup : These are the Standard Variables that can be used in Salary Head settings for writing any formula.
|
Variable Name Setting |
Variables name (to be used in formula) |
|
Basic Rate |
basic |
|
Casual Leave availed |
cas_leave |
|
Sick Leave availed |
sk_leave |
|
Privilege Leave availed |
priv_leave |
|
Other Leave |
OthLeave |
|
(+)Compensatory Leave |
compen_leave_accrued |
|
(-)Compensatory Leave |
compen_leave_enjoy |
|
Privilege Leave Encashments |
plench |
|
Casual Leave Encashments |
clench |
|
Sick Leave Encashments |
skench |
|
Other Leave Encashments |
otench |
|
Compensatory Leave Encashments |
coench |
|
Company Accommodation |
comp_adn |
|
CRI Points |
cri |
|
D A Points |
da |
|
Total days present in month |
day_present |
|
Previous month deducted ESIC |
esic |
|
LWP days |
leave_wo_pay |
|
Absent days |
day_absent |
|
Month |
mnth |
|
Earned Basic |
new_basic |
|
Overtime Hours |
ot_hours |
|
Latetime Hours |
not_hours |
|
PLB Bonus % |
plb |
|
Shift A, Shift B, Shift C |
shift_1, shift_2, shift_3 |
|
Total days in a month |
tot_day |
|
Wkly Off |
wkly_off |
|
Paid Holiday |
paid_holiday |
|
Not Worked Days |
not_present |
|
Employee Join (value 1 & 0) |
new_join |
|
Employee Confirm (value 1 & 0) |
emp_confirm |
|
Employee Left (value 1 & 0) |
emp_left |
|
Employee Resign (value 2 & 1 & 0) |
emp_resign |
|
Employee Join Months |
month_join |
|
Employee Confirm Months |
month_confirm |
|
Employee Age |
emp_age |
|
PF Flag (value 1 & 0) |
pf_flag |
|
ESIC Flag (value 1 & 0) |
esic_flag |
|
PT Flag (value 1 & 0) |
pt_flag |
|
Process Type (P=Process,S=Suplimen) |
process_type |
|
Gross Total (only Sal.Structure) |
TotalAllowance |
|
Sick Leave Balance |
sk_leave_bal |
|
Casual Leave Balance |
cas_leave_bal |
|
Priv. Leave Balance |
priv_leave_bal |
|
Compen. Leave Balance |
compen_leave_bal |
|
Other Leave Balance |
oth_leave_bal |
|
Process Month Year |
mnth_year |
|
Resign Days |
ResignDays |
|
Grade Flag Value |
GrFlagVal |
|
Branch Flag Value |
BrFlagVal |
|
Dept.Flag Value |
DeptFlagVal |
|
Desig.Flag Value |
DesigFlagVal |
|
Div.Flag Value |
DivFlagVal |
|
Cate. Flag Value |
CateFlagVal |
|
Group Flag Value |
GroupFlagVal |
|
Unit Flag Value |
UnitFlagVal |
|
Arrears Flag(Value 1 & 0) |
ISArrears |
|
Currency Rate |
CurRate |
5. Payslip Print Order : If user want to set Payslip Printing order of Head then it can be done by selecting this utility. Here user can set order as per requirement by drag and drop. Copy sequence for all grade if option selected then system will copy sequence in all other grade.

6. Deduction Priority Order : It will only work as per setup opted in Process Setting. If "Consider deduction priority while salary processing" not opted then its impact will not be shown in Payslip.
If "Consider deduction priority while salary processing" opted then Selection of "Net paid" or "Net Salary" is mandatory, as deduction priority will based on it. Prioritizing the Deduction Heads to balance the amount deducted up to the limit of total amount earned to avoid Net paid/Salary to be negative.
Note :
- Based on Grade chosen system will display the list of Deduction Columns to be chosen for priority to be considered for removing the Deduction Amount for respective heads.
- When option opted then priority of all Grade if not set then impact will not be shown in Payslip for that Grade.
- The Deduction Priority Working is done on payslip of those employees where Net Paid is less then zero (i.e. Net Paid is in Negative)
- Heads which is considered for deduction adjustment can be done in next month through adjustment entry or Supplementary.

7. Report : User can view Salary Head Report with Column Code and Name of all the grade altogether which can be Exported.

8. Download Sample File : If user want to download sample file of salary head then can be done through this option. Here user will find file which can be imported and used for creating salary heads.

10. Invalid Salary Head : If user want to find special characters in column name of salary head then it can be done through this option. On Invalid Salary Head it will generate xls file with Grade Name and Invalid Salary head name so that user can correct the head name.